Dynamo Dynamic White Lighting
With the advent of solid state lighting, often referred to as LEDs, and the digital controls that accompany it, tuning in to a specific “color” of white light is now possible. In the past, a light source’s color was fixed based on either technology, or a mix of phosphors specific to a bulb, or lamp. Now a single light source can be tuned to output warm white light, cool white light, and anything in between. The output can be fixed for an occupant’s needs, or vary based on time of day or other schedule.
Enter dynamic white lighting. By varying a luminaire’s color temperature, it is possible to mimic daylighting, to some extent, and the natural circadian rhythms that accompany it.
Lighting designers and electrical engineers are now actively working with building owners—predominately schools, retail, healthcare and correctional facilities—to deliver lighting that encourages different behaviors. Tuning the spectrum to cooler light can stimulate a more focused, alert state amongst building occupants, and has been shown to increase productivity. Conversely, shifting to a warmer spectrum contributes to a calmer, more relaxing environment. In an education environment, cooler lighting can keep students more alert and focused during testing, where warmer light can help younger children calm down after coming in from a rowdy recess. In retail environments the specific blends of color temperatures a couple other design parameters have been shown to attract specific shopper’s personalities.
Lately, a lot of research has been devoted to the effects of light on our circadian rhythms. Our bodies respond in specific ways to light of various correlated color temperatures (CCTs) and underlying spectrums. Cooler white light with a strong blue component can suppress melatonin, and keep you up at night. However, that same cool blue light can help reset your daily clock if received earlier in the day. When it comes to the built environment, nothing does a better job of delivering the right light at the right time than daylight. However, it’s not always possible for architects to bring in as much natural light as might be desired. Although the technology has some room for improvement in regards to circadian response, dynamic white lighting can provide some of the benefits of daylighting where natural light is unavailable. In healthcare, dynamic lighting is focused on circadian mimicry to aid healing. Certain therapies and treatments are linked to greater efficacy when applied at certain times of the day, so design is experimenting with natural lighting solutions that mimic the sky outside. This same design approach can be used to limit or treat the symptoms of Seasonal Affective Disorder in locations where weather or latitude may limit sunlight exposure during winter months.
How it’s Done
While LED fixtures and controls technology are available for designing and programming desired CCTs based on the time of day and season, it is not always a simple endeavor. Controls for dynamic white systems come in two technologies: analog and digital. Analog systems are generally better understood by most installers and end users, however, dynamic white lighting requires twice the number of control zones compared to a standard dimming system and are tied to the wiring design requiring an electrician to make changes. With digital systems, dimming and zones are independent of the wiring and can be modified after installation without an electrician, but the control software and system troubleshooting can be more complicated.
Whatever the approach, a dynamic white lighting installation requires close collaboration between the general contractor, electrical contractor, lighting controls manufacturer, architect, engineer, lighting designer, and the building owner.Together, this team must establish how the light system will be designed, installed and controlled based upon the end users’ needs and the technology’s capabilities.
Hesitancies and Limitations
Despite the fact that a number of building owners are pleased with the way dynamic white lighting is boosting alertness and productivity levels in their facilities, many are hesitant to adopt the technology.
For starters, the CCT many people find acceptable is tied to culture and experience. In the states where warmer CCTs have been commonplace, building occupants are not used to or accepting of the appearance of cool white light. The increased complexity of the control systems required to dynamically alter the CCT may not be something facility managers are accustomed with. Furthermore, the increase in complexity and capability are typically tied with added cost for both the products and the installation labor.
In addition, scientists and the lighting community are still working to determine the specific blue light wavelengths and intensities required for stimulating circadian rhythms. And at this point, those levels are only an estimation.
At the same time, some groups have released blue light exposure warnings without covering pertinent information like time of day and hazardous wavelengths. Last year, the American Medical Association released information detailing blue light hazards such as eye damage, impaired sleep, and more. While the article was probably intended to encourage lighting designers to consider the potential hazards of lighting design, the lack of detail likely provided confusion and general distaste to the public.
What’s to Come
Although technical limitations currently exist, it won’t be long before lighting manufacturers can tune the spectrum to achieve desired circadian benefits with a variety of fixtures from which to choose. And as researchers work to define the specific blue light levels of natural circadian rhythms, it is anticipated that LED lighting technology will be able to more accurately simulate the desired biological response. Aside from the potential circadian benefits, there are plenty of other known benefits of dynamic white lighting.
As for the controls systems, easier to use and more simplified user interfaces with greater automation are emerging, making the whole dynamic lighting process less daunting and more accessible.
Do you want more Insights like this delivered directly to your inbox? Subscribe to our email list.